Biosynthesis of Gold Nanoparticles by Flavonoids from <Emphasis Type="Italic">Lilium casa blanca</Emphasis>

Biosynthesis of gold nanoparticles (GNPs) by flavonoids from Lilium casa blanca has been developed. Several parameters such as pH, reaction temperature, reaction time and concentration of flavonoids were explored to control the formation of the GNPs. The synthesized GNPs were characterized by UV–Vis spectroscopy, transmission electron microscopy and X-ray diffraction. Stability and catalytic activity of the synthesized GNPs were also discussed. The results showed that the synthesized GNPs were in spherical, about 2.6 nm, with a face centered cubic structure. Synthesized GNPs showed good catalytic activity in the reduction of p-nitrophenol (p-NP) to p-aminphenol (p-AP). This method for synthesis of GNPs is simple, economic, nontoxic and efficient.     

Dual-Polarity Ion Trap Mass Spectrometry: Dynamic Monitoring and Controlling Gas-phase Ion–Ion Reactions

A dual-polarity linear ion trap (LIT) mass spectrometer was developed in this study, and the method for simultaneously controlling and detecting cations and anions was proposed and realized in the LIT. With the application of an additional dipolar DC field on the ejection electrodes of an LIT, dual-polarity mass spectra could be obtained, which include both the mass-to-charge (m/z) ratio and charge polarity information of an ion. Compared with conventional method, the ion ejection and detection efficiency could also be improved by about one-fold. Furthermore, ion–ion reactions within the LIT could be dynamically controlled and monitored by manipulating the distributions of ions with opposite charge polarities. This method was then used to control and study the reaction kinetics of ion–ion reactions, including electron transfer dissociation (ETD) and charge inversion reactions. A dual-polarity collision-induced dissociation (CID) experiment was proposed and performed to enhance the sequence coverage of a peptide ion. Ion trajectory simulations were also carried out for concept validation and system optimization.

Open image in new window

Graphical Abstract ?

     

镁热还原CO2气体制备介孔石墨烯及其电容特性研究

以CO_2为原料,采用金属镁热还原法,制备出富含介孔结构的石墨烯材料。分别利用X射线衍射、扫描电镜、透射电镜、拉曼光谱和N_2吸附-脱附等测试手段对材料的微观结构进行了表征。通过在镁粉中加入不同质量的MgO,可以实现对石墨烯形貌和孔结构的调控,当MgO/Mg质量比为8∶1时,产物(MRG-8)具有均一的介孔结构(4nm)。并对材料的电化学性能进行了测试,在1mol/L KOH的电解液中,MRG-8具有最高的比电容(171F/g),同时具有非常好的倍率特性,循环测试12000周,比电容保持率为94%。当采用[EMIM][BF4]离子液体作为电解液,以MRG-8为电极材料组装成的对称型超级电容器显示出超高功率密度(175k W/kg),对应的能量密度为28.1Wh/kg。因此,采用此方法制备的介孔石墨烯材料在高功率的超级电容器领域具有潜在的应用前景。     

Development of nanofibrillated cellulose coated with gold nanoparticles for measurement of melamine by SERS

The objective of this study was to develop nanofibrillated cellulose (NFC)-based substrate for rapid detection of melamine in milk by surface-enhanced Raman spectroscopy (SERS). NFC were served as a highly porous platform to load with gold nanoparticles (AuNPs), which can be used as a flexible SERS substrate with nanoscale roughness to generate strong electromagnetic field in SERS measurement. The NFC/AuNP substrate was characterized by UV–Vis spectroscopy and electron microscopy. Milk samples contaminated by different concentrations of melamine were measured by SERS coupled with NFC/AuNP substrate. The spectral data analysis was conducted by multivariate statistical analysis [i.e. partial least squares (PLS)]. Satisfactory PLS result for quantification of melamine in milk was obtained (R = 0.9464). The detection limit for melamine extracted from liquid milk by SERS is 1 ppm, which meets the World Health Organization’s requirement of melamine in liquid milk. These results demonstrate that NFC/AuNP substrate has improved homogeneity and can be used in SERS analysis for food safety applications.     

Hierarchical porous cellulose/activated carbon composite monolith for efficient adsorption of dyes

Cheap and efficient adsorbents to remove contaminants of toxic dye molecules from wastewater are strongly in demand for environmental reasons. This study provides a novel design of a monolithic adsorbent from abundant materials via a facile synthetic procedure, which can greatly reduce the problems of the tedious separation of adsorbents from treated wastes. A hierarchically porous cellulose/activated carbon (cellulose/AC) composite monolith was prepared by thermally-induced phase separation of cellulose acetate in the presence of AC, using a mixture of DMF and 1-hexanol, followed by alkaline hydrolysis. The composite monolith had alarge specific surface area with mesopore distribution. It not only showed high uptake capacity towards methylene blue (MB) or rhodamine B (RhB) but could also simultaneously adsorb MB and RhB from their mixture, in which the adsorption of one dye was not influenced by the other one. Remarkable effects of solution pH, initial concentration of dye (C ₀), contact time, adsorbent dosage and temperature on the adsorption of MB and RhB onto the composite monolith were demonstrated. The binding data for MB and RhB adsorption on the composite monolith fitted the Freundlich model well, suggesting a heterogeneous surface of the composite monolith. The monolith could retain around 90% of its adsorption capacity after 8 times reuse. These data demonstrate that the cellulose/AC composite monolith has a large potential as a promising adsorbent of low cost and convenient separation for dye in wastewater.     

A Practical High-Energy Cathode for Sodium-Ion Batteries Based on Uniform P2-Na0.7CoO2 Microspheres

Layered metal oxides have attracted increasing attention as cathode materials for sodium-ion batteries (SIBs). However, the application of such cathode materials is still hindered by their poor rate capability and cycling stability. Here, a facile self-templated strategy is developed to synthesize uniform P2-Na_0.7CoO₂ microspheres. Due to the unique microsphere structure, the contact area of the active material with electrolyte is minimized. As expected, the P2-Na_0.7CoO₂ microspheres exhibit enhanced electrochemical performance for sodium storage in terms of high reversible capacity (125 mAh g⁻¹ at 5 mA g⁻¹), superior rate capability and long cycle life (86 % capacity retention over 300 cycles). Importantly, the synthesis method can be easily extended to synthesize other layered metal oxide (P2-Na_0.7MnO₂ and O3-NaFeO₂) microspheres.     

Copper-catalyzed regioselective allylic oxidation of olefins via C–H activation

A regioselective oxidation of allylic C–H bond to C–O bond catalyzed by copper (I) was developed with diacyl peroxides as oxidants. The oxidation of allylic C–H bond was accomplished with good yield and regioselectivity under mild reaction conditions. This method has a broad substrate scope including cyclic olefins, terminal and internal acyclic olefins and allyl benzene compounds. The reaction proceeds by a radical mechanism as suggested by spin trapping experiments.     

Even factors with a bounded number of components in iterated line graphs

We consider even factors with a bounded number of components in the n-times iterated line graphs L ⁿ (G). We present a characterization of a simple graph G such that L ⁿ (G) has an even factor with at most k components, based on the existence of a certain type of subgraphs in G. Moreover, we use this result to give some upper bounds for the minimum number of components of even factors in L ⁿ (G) and also show that the minimum number of components of even factors in L ⁿ (G) is stable under the closure operation on a claw-free graph G, which extends some known results. Our results show that it seems to be NP-hard to determine the minimum number of components of even factors of iterated line graphs. We also propose some problems for further research.